Guest Post by Gwen Hefner: The Baby Witch Hat

Well do I have a treat for you today...I am so excited to be hosting our first guest poster!   Gwen Hefner, extremely talented and always creative, brings us a darling tutorial for a lil' Witch's Hat.  And wait until you see her little cutie! 

Halloween is a week from today!!  Do you have your costume ready??

And without further ado....I bring you, The Baby Witch Hat...



I want to thank Jenny for giving me the chance to do a guest post.  Sharing my DIY’s with others is something I’ve wanted to do for a long time, and I appreciate her giving me the chance to get my feet wet.

 

When my son turned 3 in September, he requested party hats and I knew I wanted to make something for my daughter, Milly, as well.  After sizing down the pattern I made for the bigger hats, I came up with this.

 

With Halloween fast approaching, and no luck finding a great costume for a baby under six months, I began contemplating what I could whip together.  Halloween has always been my favorite, and growing up I was fascinated with witches, playing the part of one myself several times.  I figured modifying the party hat pattern would be a simple solution!

 

Here is what you will need:

the essentials:

felt

witch's hat PDF 

a writing utensil (chalk works will for black felt)

1/16” elastic cord

hot glue or fabric glue

 

the possible pretties:

buttons

ribbon

rick rack

feathers

beads

tulle

bows

a little spider moss would be fun

whatever your heart desires!

 

Print and cut out the pattern templates.  Using a cardstock  or thicker paper will make them easier to work with.
 

 

Trace them onto the felt and cut out the shapes.

 



 

Shape the top of the hat like it’s a waffle cone.  You should have an overlap of about ½” at the base. 

Glue the hat together, leaving the end unglued so you have some room to tuck your trim under.

 

Glue the top of the hat to the brim, making sure the hat is centered.  Don’t worry about any visible glue, as you’ll be covering that seam up with ribbon.

 

Cut and glue ribbon around the seam, tucking the ends in at vertical seam, and gluing that area down.

 

Now you’ll want to embellish your hat.  I added some old buttons, a feather, and some tulle that I colored with a sharpie.  With two little ones, a quick trip to the craft store isn’t an option, so I made what I had work.

 

I did the same thing with the elastic.  I know you can buy elastic in many colors, but I’ve found that coloring it with a sharpie for various headbands has worked well.  If you’re worried about the strong odor, I just rinsed it in some soapy water afterward and after a few days the smell had dissipated.   I simply placed it around Milly’s head to see what length I needed. 

 

Place a drop of glue on in the center of the bottom of the hat and attach both ends of the elastic. 

 

Cut a circle out, smaller than the brim of the hat, and glue it over the elastic ends.

 

 

There you have it!  A cute little hat for your little one, or your big one, or maybe yourself as you hand out treats on All Hallows’ Eve.

 

 

 

 

Isn't that just the cutest lil smile you've ever seen!  She definitely looks like a good witch to me :)

Thanks so much Gwen for sharing your creative talent with us!

Happy Wednesday everyone,

Jenny

Candy Corn Bag Tutorial

These little bags came to be after two ideas kind of collided.  When my brother, sister and I were little, my mom made each of us these darling little bunny appliqued drawstring bags to hold our jelly beans at Easter.  They really were one of her secret little tricks to try and get us to be quiet in church Easter morning...super sneaky mom. I had planned to tutorial those cute little bags in the the spring, but then conjured up the idea of a candy corn bag for Bryce to give favors to his buddies in. Since Bryce's favorite candy is candy corn ( how appropriate is that for an October baby ), these little gift bags started something that grew into the theme of his 6th birthday party.  They were, of course, filled with candy corn, and also a test tube of glow-in-the-dark green slime, and funny glasses.

 

On to how to make this quick easy little bag!  A great project for the any beginner...  

 

Materials:

-1/4 yard (or scraps will work too!) of white, orange, and yellow cotton fabric

- 24 inches of 3/8 inch matching ribbon

white thread

rotary  cutter

 

 

1.  First, You need about 1/4 of a yard of orange, yellow and white cotton fabric.  Kona is my favorite, it just washes and holds up really well. 

 

NOTE:  For my party I needed 13 bags, so I cut about 3 strips of 45" fabric to get 26 sides for 13 bags...agh! Math! You can get about 4 bags out of one strip of 45" fabric - please note in my pics my strips will look longer due to the number of bags I was making.

If you just want to make ONE bag your width will be 10 inches ( this will give you two pieces of roughly 5x6 inch sides).

 

Using a rotary blade cut 3 strips...the white will be 3 inches long x at least 10" wide , the yellow and orange 2 1/4 inches x 10 inches.

 

 

 2. Match the long edges (width) of your white and orange fabric together and pin. Sew 1/4 inch seam (see green line in photo).

 






3. I don't have a serger, so I went back and zig-zag stitched over my edge to reduce fraying. If you do have a serger, this step can be eliminated.


4.  Pin the yellow strip to the other side of the orange with a 1/4 inch seam and finish with zig-zag stitch.

 


5.  Press the seams down, so that the finished piece lays nice and flat.

 

 

 

 

6.  Measure a 5 inch width out of your strips and cut.  If you are making one bag, you now have two pieces that look like this.... 

If you are making multiple bags, cut 5 inch widths out of the entire strip.  This should give you about 7-8 bag faces (depending on the width of your fabric).

 

 

 

7.  Place the fronts together and pin.  I started stitching 1 inch down from the top left corner of your bag and continue down across the bottom and back up the other side, again, stopping 1 inch before you reach the top of the bag.  I back stitch at the start and the finish to reinforce the seams.  (please ignore the incorrect order of my fabrics on the photo below!  I forgot to photograph this step and had to use one of my goof ups!)

 

 

 

 

 8. Now, take your iron and on the front (it's still wrong-side out) fold the 1/4 inch seam in the top 1" of un-sewn fabric into the bag...see picture. Do this on the left and right side of the front. Then, flip over to the back of the bag and do the same thing.

 

 

 

9.  Picking up only the front facing of the bag, fold down 1/4 inch of white fabric and press.  Fold down another 1/2 inch and press again.  This will form your casing on the front of the bag.  Do the same on the back of the bag. 

 10.  Stitch (see green line in photo above) right along the edge of the casing. ( I turned my bag right-side out to complete this step)



11.  Cut a 12 inch length of 3/8 inch ribbon of your choice.  Attach a safety pin to one end of the ribbon and feed it through the casing, beginning and ending on the same side.  Take your second piece of 12 inch ribbon and on the opposite side, feed it through the casing in the same manner.





















12. Singe the edges of your ribbon with a lit match...be careful!  If you get the match too close to the ribbon it will catch on fire!  I stand at the kitchen sink, in case of emergency, and get it just close enough that the edge of the ribbon seals...this will prevent fraying.  Tie a knot on both sides and you are done! 

Happy Halloween everyone!
I hope your little one enjoys their candy corn bag as much as my little ones do!


Jenny

 

 

 

Happy Saturday!

Just popping in to wish everyone a great weekend!  I hope you all are enjoying this gorgeous weather!  I know we are.  The Johnson's are re-cooperating from a big birthday weekend as we celebrated Bryce's 6th Birthday yesterday.  The boys have been enjoying some beautiful bike rides on Bryce's new wheels!  What a big guy he is getting to be!

 

 

Stop back by tomorrow and I should have up a fun candy-corn bag tutorial ...just in time for those Halloween goodies!

 

Happy Saturday everyone....

 

Jenny

Birds of A Feather Flock Together

I had the fantastically fun opportunity this week to work on a little project for a good friend and neighbor of ours!  My friend Emily recently had a little girl, adorable Eleanor...such a cutie!  Eleanor was in need of a few last finishing touches to her already adorable nursery.  Emily "commissioned" me to do three murals for the nursery that went with her Pottery Barn Bedding.  Emily is awesome and gave me complete freedom to do whatever!  An artist dream!  I have done lots of murals in children's bedrooms, but this was my first "mini-mural" attempt...and let me just say I am completely head-over-heals for working on canvas instead!  I loooved being able to incorporate paint, fabrics, trims, texture, and scrapbook papers into these mini's. 

 Another talented friend had already designed some darling letters for her room and made a beautiful ribbon mobile (you can see her ETSY store here).   She was kind enough to let me use some of the same papers to tie everything together, but to keep it from being too matchy-matchy I added a few more.  I was really shooting to combine a very artistic, loose painting style with the very child-like "cut paper" feeling that the quilt provided.  I incorporated lots of blended paint areas to contrast with the cut paper collage elements.  And I am an absolute sucker for embellishment so of course rick-rack, glitter, and some iridescent paint were absolutely mandatory! 

We did two nature themed canvases, to compliment the bedding, and one with the folded paper fans.  I thought the folded paper fans would help add more texture to the theme and help break up the unity of having three pictures exactly the same.  A have a tutorial in the works for the fans when I show off a few more I made for Kate's room next week....stay tuned!

I can't wait to see how these three look living in their new home! 

 

 

 

Hope everyone has a safe and fantastic weekend!

 

Jenny

Believe

I have missed you! Our computer has been away for almost two weeks getting fixed...it was very sick.  While it was gone I was just cringing thinking about what a great direction the blog was moving in and then to just go untouched for three weeks...well, I was worried!  To my surprise when I logged in last night and checked the site, wow!!!  We have had over 3,000 page views since starting in June.  I don't know if that's great or not, but to me, I think it's outstanding!  Just in the last month we have had visitors from the United States, United Kingdom, Russia, France, Canada, Germany, Malaysia, Ukraine, Australia, and Ireland.  This. Amazes. Me. I am completely humbled and thankful that there are folks out there seeing what we've been up to and checking in!  Thanks so much for sticking with us!   Which brings me to the first of many little projects that I have been working on the past few weeks...A good friend of ours who is the principal at an amazing little school in our community asked me if I would help her make some pillows for her school.  I was happy too!   The seven pillows were to spell the motivational word "Believe".    I thought a lot about that word while I worked.  It seemed pretty appropriate too, since I have really been in "decision-mode" about things having to do with the Etsy store, and promoting it.  I just keep coming back to the word "Believe".  I think that is exactly what we have to do when we just aren't quite sure where to step next...close your eyes, stop worrying, and just BELIEVE!
Happy Wednesday!   Jenny